#Vinyl curtains for screened porch install
#Vinyl curtains for screened porch driver
#Vinyl curtains for screened porch windows

We’ve had winds up to 100 km/h since I installed it and it just stays steady in place. Thankfully, it’s heavy enough that it does not move at all, even when the wind is howling. I’m guessing thinner vinyl would rattle in the wind, but this stuff does not. Does vinyl sheeting get noisy in the wind? The built-in rubber washers help form a nice tight seal without damaging the vinyl.Īnd I love how they become part of the design, kind of like rivets, framing each area. These are the same screws I used to attach the polycarbonate panels on my greenhouse.

#Vinyl curtains for screened porch windows

I attached everything to the exterior of the patio so the wind could not blow the vinyl windows in.

#Vinyl curtains for screened porch driver

I cut the vinyl pieces a few inches bigger than the area I was enclosing and attached it with hex head roof screws with neoprene washers using the cordless drill with a driver bit. I didn’t want to frame my vinyl in with wood slats so I did it differently. It is not suitable for heat-sealing because it is too thick. If you wish to use an adhesive, there are rubber and vinyl adhesives like this one by 3M that work.

sew (with an industrial-strength sewing machine).

You should always test first ( order sample pieces) if you will be putting a lot of strain on the vinyl, but generally speaking it is possible to:

#Vinyl curtains for screened porch install

How do you install or attach vinyl sheeting? It would be ideal to have a giant table to lay the whole thing out, measure, and cut, but that would be a very big table! The vinyl comes in rolls, lined with protective paper. But it’s not suitable as a floor mat, as mentioned. If this is a concern, get a sample and test it. I’m sure you could damage it if you really tried, but it is resistant to fingernails and what not. But don’t hold me to it, it’s just anecdotal evidence. I couldn’t find any research notes on it, but I do see people use the 40-gauge vinyl sheeting to cover car windows where the interiors get very hot in the sun and they say there is not a problem. So far, it looks new other than some sand dust sticking to it from the garden (our soil is very sandy) which I can brush off.

We often get winds up to 100 km/h (62 mph) when it rains so there’s quite a bit of force against the vinyl. If your climate is warmer, you could use a thinner product. I specifically chose this gauge because it is made to withstand our lowest outdoor temperatures. The product shown here is 40-gauge which means it is 0.040″ thick and can withstand temperatures down to -30✯ (-34✬). Will vinyl sheeting turn yellow over time? On the site they note: “waves and slight distortions may be present as a result of the manufacturing process but are not considered to be defects”.Īnd I agree. It’s clear but it’s also thick so, when you look straight through it, it appears clear, but it can appear slightly distorted from an angle, the same way windows do. This vinyl sheeting is pliable and chairs would certainly dent it, the static electricity would make it a dust magnet, and it would be slippery to walk on. No! It’s not like those solid sheets sold for that purpose.

I see some people asking if they can use it under a dining table or as floor mat under a desk. You could use the vinyl to make a curtain for the doorway to keep the heat in yet be able to see what’s going on in the other area. Say, for example, you have a workshop with a heated area and a separate unheated area. It can also act as an industrial strength see-through curtain. If you are unsure of how it may work for your project, order a sample first and test it out. Keep in mind that I have only tried the 40-gauge vinyl sheeting, not any other thicknesses, and only from the, not any other supplier. I’m going to answer everything I wanted to know when I was researching vinyl sheeting options.